Rubber Machine, Rubber Bale Cutter
- This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife.
- When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.
- Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder
- This machine is suitable for various kinds of rubber material , plastic material and different types not metal material with hardness .
- The machine owns simple structure , high grade automatic level ,easy operation,little noise ,equipped with safety device, material feeding speed adjustable and so on
- This machine mainly used for cutting natural rubber ,synthetic rubber into small pieces for plasticating and mixing , it is widely placed near the rubber kneader machine , cutting big rubber material into small pieces for next step
- The machine mainly consists of cutter , rack , hydraulic station ,machine base ,electrical cabinet ,etc .There is nylon mat on the surface of machine to protect the knife against damage .
- when you need cut the material , just put the material into feeding roller ,and feeding roller will feed the material under the knife , then press the motor button in cabinet , knife will fall down and cut the material
- The bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
- The cutter is matched with working track, which makes rubber feeding much more convenient