The laboratory roll mill Poly mix is a compact machine for mixing all types of plastic and rubber material.2. Kneading power of motor:0.75KW, 120V/60Hz/One phase3.Mixing chamber volume: 0.05L-0.1L4.
Top plug: cylinder drive, hard chrome plated5.
Feeding hopper: manual operation6. Power of heating system:1Kw,up to 250oC,power of vacuum pump:0.75Kw7.
Clearance between blade and kneading chamber:1.5+0.5mm;clearance between the end of blade and side plate:1.5+0.5 mm8. Control mode: operation is manual and semi-automatic;Mixer temperature: standard internal mixer is normal temperature to 300o high temperature internal mixer has done 650o9.
Rotor: Two-edge, synchronous rotor structure (can also be designed and manufactured according to the rotor structure diagram provided by the user), the front-to-back rotor speed ratio is 1:1.20 or ST synchronous rotor specific parameters can be customized free of charge according to customer requirements, cast steel quenching and hardening treatment, Surface is hard chrome plated; bearing is ball bearing roller bearing; bearing lubricating oil bath; rotor speed: 0.05L: 36 rpm / minute specific speed can be customized according to customer needs10 Material contact with products:SUS316L stainless steel11. Electrical control system:motor forward,motor reversal,motor stop,vacuum pump knob,heating knob,temperature display,emergency stop.12.Pressurized cover adopts "M" type structure to make rubber compounding more uniform